CONTEXT. JUDGEMENT. ACTION.
EDITIONBUSINESS.

Useful journalism to understand, manage and grow a business.

Search
Explore Edition Business
Guide · Unión Europea

Practical Guide: How to Verify Regulatory Requirements and CE Marking for a Product in the EU

A step-by-step procedure for SMEs to identify applicable legislation, distinguish harmonized standards, and manage conformity assessment, technical documentation, and CE marking before marketing in the European Union.

Illustration of books with a balance scale, a checklist, a magnifying glass over a gear, and documents arranged in sequence toward a box marked CE, in front of a blue arch with yellow stars.
Editorial illustration · Edition Business

Marketing products in the European Union requires compliance with a complex but structured regulatory framework. For SMEs, the key is not just knowing that standards exist, but knowing how to apply them correctly to avoid sanctions, market withdrawals, or the inability to sell. This guide details the regulatory verification process, from identifying applicable legislation to the correct application of CE marking.

Identification of applicable legislation

The first step is to determine whether the product is covered by EU harmonization legislation. This legislation establishes essential safety, health, and environmental protection requirements that are common to all Member States. The European Commission maintains official lists of these directives and regulations, as well as the associated harmonized standards.

It is fundamental to consult these official sources, such as the Commission's Single Market Economy portal, to verify if the specific product (for example, toys, electrical equipment, medical devices, or machinery) is subject to a specific directive. If the product is not covered by any of these specific legislations, the General Product Safety Regulation (GPSR) applies, which requires that all products placed on the EU market are safe, although it does not require CE marking.

Harmonized standards vs. general technical standards

Once the applicable legislation has been identified, it is crucial to distinguish between two types of technical standards:

  • Harmonized standards: These are European standards (generally EN standards) developed by recognized standardization bodies (CEN, CENELEC, or ETSI) at the request of the European Commission. Their references are published in the Official Journal of the European Union (OJEU). Compliance with these standards grants a presumption of conformity with the essential requirements of the applicable legislation. In other words, if the product meets the harmonized standard, it is legally presumed to meet the directive.
  • Non-harmonized standards: These are other technical standards (which can also be EN standards) that have not been referenced in the OJEU for a specific directive. Their compliance does not grant a legal presumption of conformity, although they can be a useful tool to demonstrate product safety, especially under the GPSR.

Responsibility of economic operators

EU legislation assigns specific responsibilities to different actors in the supply chain:

  • Manufacturer: Is the primary responsible party. Must carry out the conformity assessment, prepare the technical file, sign the EU Declaration of Conformity, and affix the CE marking. The manufacturer is considered to be the one who produces the product or has it produced under their name or brand, assuming responsibility for the conformity of the complete product, including third-party components.
  • Importer: Must verify that the manufacturer has fulfilled their obligations (technical file, declaration of conformity, CE marking) before importing the product into the EU. They must keep copies of the documentation and be available to market surveillance authorities.
  • Distributor: Must ensure that the product bears the CE marking and the necessary documentation before making it available to end consumers.
Conceptual illustration of a verification process: one hand checks a checklist and another inspects a generic box with a magnifying glass, with icons of a gear, institutional building, and certificate in the background.
Editorial illustration · Edition Business

Conformity assessment process

The conformity assessment is the process by which it is verified that the product meets the essential requirements of the applicable legislation. The assessment method depends on the specific directive or regulation:

  1. Self-declaration of conformity: In many cases (for example, toys, low-voltage equipment), the manufacturer can carry out the assessment themselves, based on compliance with harmonized standards and/or internal tests. The intervention of an external body is not required.
  2. Intervention of a Notified Body: For higher-risk products (for example, medical devices of Class IIa or higher, personal protective equipment of Category III), the legislation requires the intervention of a Notified Body. This independent body, designated by a Member State, carries out tests, inspections, or audits and issues a certificate of conformity. The manufacturer cannot affix the CE marking without this certificate.

It is essential to review the applicable directive to determine which conformity assessment module is mandatory.

Technical documentation and EU Declaration of Conformity

Two documents are pillars of conformity:

  • Technical File: It is a set of documents describing the product, design and manufacturing methods, applied standards, test reports, and calculations performed. It must be detailed enough to demonstrate the product's conformity. The manufacturer must keep it for at least 10 years (or the time specified by the legislation) and make it available to market surveillance authorities upon request.
  • EU Declaration of Conformity: It is a document signed by the manufacturer declaring that the product meets all applicable requirements of EU legislation. It must include specific information about the product, the manufacturer, and the applicable legislation. It must accompany the product or be available electronically.

CE marking: what it is and what it is not

CE marking is a regulatory conformity marking, not a quality seal or an origin indicator. Its placement indicates that the product complies with EU harmonization legislation and can be freely marketed in the EU single market and the EEA.

  • It is not a quality seal: It does not guarantee that the product is superior to others in terms of performance or durability, only that it meets the minimum legal safety requirements.
  • It is not an origin indicator: A product manufactured in China, India, or the US can and must bear CE marking if it complies with EU legislation and is sold in the European market.
  • It is mandatory and exclusive: It can only be used on products covered by harmonization legislation that requires it. Its use on products not covered by this legislation is illegal and can be sanctioned. Furthermore, it must not be used in a way that could be confused with other markings.

Additional national obligations and general safety

Although EU harmonization legislation establishes common requirements, Member States may impose additional national obligations in non-harmonized areas or for market surveillance. It is important to consult the local regulations of the destination country.

For products not covered by a specific directive, the General Product Safety Regulation (GPSR) is the applicable standard. It requires that products are safe and that manufacturers and importers take measures to prevent risks. Although it does not require CE marking, non-compliance with the GPSR can lead to the withdrawal of the product from the market and sanctions.

Frequently asked questions

Do I need a certificate to obtain CE marking?

Not always. In many cases, the manufacturer can make a self-declaration of conformity without the need for a certificate from a notified body. However, for higher-risk products, the intervention of a Notified Body is mandatory and its certificate is a prerequisite for affixing CE marking.

Can I use CE marking if my product is not covered by an EU directive?

No. The use of CE marking on products not subject to EU harmonization legislation is illegal. In these cases, the product must comply with the General Product Safety Regulation, but it does not bear CE marking.

What happens if my product is subject to several EU directives?

You must comply with all applicable directives. CE marking is affixed only once, but the EU Declaration of Conformity must mention all applicable legislations and the technical file must demonstrate conformity with each of them.

Sources and methodology

  1. Product Standards in the European Union: A Complete Guide ↗www.compliancegate.com
  2. CE Marking Requirements: 2026 Guide ↗www.complir.io
  3. A guide to the European Union's product safety standards ↗webinterpret.com
  4. Harmonised Standards ↗single-market-economy.ec.europa.eu
  5. CE marking – obtaining the certificate, EU requirements ↗europa.eu
  6. CE marking - Internal Market, Industry, Entrepreneurship and ... ↗single-market-economy.ec.europa.eu
  7. Trade regime and general product safety | Access2Markets ↗trade.ec.europa.eu
  8. Product requirements | Access2Markets ↗trade.ec.europa.eu
Report an error ↗

Continue exploring